One of the most difficult times for me, personally, on any project is the middle section. You have some stuff done and it all seems like it's fitting into place but you know there is still a long road ahead until it's finished and often you don't see how to get there clearly. I find this time really difficult and I have a habit of comparing the current state of a project to finished examples. Most of the time this comparison is not exactly favourable on the unfinished work.
For me this whole stage of the project process is a little bit like the infamous scientific proof where one section simply reads "magic happens here". That "magic" is this middle part of the project or more specifically it's the transition between the middle section and some beautiful end state. At some point it stops being a middle of a project and becomes the beginning of the end. The home stretch, the last lap.
My main issue with this process is mental, it's the mental malaise that comes with comparing to finished work and not knowing how to get the current project to that state. Even if I do know how to get there, that can still be difficult because it doesn't feel like it's possible to get to that end state. I can genuinely start to feel depressed about the fact that I don't seem to be any closer and can't get past that middle ground and over the "magic" bridge into a clear path to the goal. Recently though there are two techniques that I've been using to combat this.
The first technique is something that I call current-state-mindfulness. This is the mental act of trying to take delight in the current stage of the process. If I am recording guitars then I am trying to really enjoy recording them, geek out and get really into it. Find the joy in mic placement, amp selection and all the other stuff that goes along with it. To quote Ze Frank "Try not to view the current state as just a stepping stone to something else, and if it is then try to become fascinated by the shape of the stone".
My second technique is cathartic side projects. These are basically projects that aren't what I would consider core to my main goal or are styles that I don't really particularly have anything to add to but they make me happy to create. Recently i've been working on a serious of metal tracks under an EP called Adrenaline Fuel. These have no vocals and I set up the basic mix of these in a pre-production stage before I started. The goal of them is to enjoy making them but also to allow me to have something musical that has a quick turnaround. I don't spend days agonising over the mix or this sound or that, I just make them some good-ish and then release them. The point is that finishing them gets me through that mid-track malaise. I often use them as a method of getting a break from something that is much more involved or mentally taxing. They also don't sound bad at all which is a nice aside. I often listen back to them just for the fun of it. It's almost free-ing to listen to something i've made and not criticise it.
Showing posts with label production. Show all posts
Showing posts with label production. Show all posts
Friday, 21 October 2016
On being mid-project and the fascination of stepping stones
Labels:
adrenaline,
cathartic,
depression,
engineering,
finishing,
fuel,
magic,
malaise,
management,
middle,
mindfulness,
Music,
Pipo,
production,
project,
side,
stuck in a rut,
unfinished,
ze frank
Friday, 30 September 2016
Scratch tracks and recording with a different sound
So recently I have been experimenting with recording tracks with a different sound to that which I intend to have in the final mix. The reason for this is that I'm trying to separate my concerns when it comes to the sound versus the performance. When I record guitar I like to record with a very bass heavy, muddy, oversaturated tone. Why? Well quite frankly because I play better with that sound. I grew up playing guitars in my bedroom with no other instruments and I got used to the sound of the guitar taking up all the frequency spectrum because I had no other instruments to play with it. When I play with that type of sound I get a really good performance because it feels natural to me. The problem I have been finding though is that this isn't always the best sound when it comes to mix time. In particular I struggle to get the drums and guitars to gel without muddying up the entire mix. It occurred to me that what I really want to do is record with the tone I like but have the actual tone be something more fitted to the track. The way I handle this is to record a dry version of the guitar input to the daw and then re-record the amp tracks, from this dry tone, later. I monitor through my usual guitar setup so what I hear while i'm recording is my familiar tone. This is re-amping as we all know and love and nothing spectacular. What to me was the revelation was the idea that I didn't have to actually record in anything like the tone I planned on having in the end mix. For a start the tone I like to record with is a Marshall and the track I was working on ended up using a Mesa Boogie. This got me wondering if other guitarists have this same problem of hearing a good tone as something that is virtually unusable when it comes to mix time, or whether this is just a very peculiar affliction on my part?
I remember listening to an interview with Celldweller and Blue Stahli where they both talked about making demo versions of tracks, and then changing them later. They use crappy sounds to begin with to get the idea down and then work on the better version later. I find this really interesting because it is exactly what i'm discovering as a way to work, you are treating the different stages of the process as separate. Writing is writing and producing is producing.
I remember listening to an interview with Celldweller and Blue Stahli where they both talked about making demo versions of tracks, and then changing them later. They use crappy sounds to begin with to get the idea down and then work on the better version later. I find this really interesting because it is exactly what i'm discovering as a way to work, you are treating the different stages of the process as separate. Writing is writing and producing is producing.
Labels:
Audio,
bass,
creativity,
drums,
dry,
engineering,
gel,
Guitars,
making,
Mixing,
mud,
muddy,
Music,
performance,
Pipo,
production,
re-amping,
tone,
wet,
writing
Monday, 2 May 2016
Getting geeky about speaker placement
Its a good thing !
So recently i'm sitting in front of my speakers, working away on a track and I notice that one seems slightly closer than the other. I'm hearing a tiny phase issue, just some washiness so I decide to get out the measuring tape and investigate. I'm not wrong. One is not only closer to the back wall but its also slightly pointing at an angle compared to the other. I can only assume that at some point I must have nudged it just a slight amount, caught it walking by. Why is this important? Well it's important because the distance your speakers are from each other, the wall and you can make a massive difference to what's known as the sweet spot. The sweet spot is where you can hear the mix translated most clearly, every frequency in it's place and nothing over-exaggerated or over-hyped. For most speakers this is a fairly small point (Think Sheldon from the big bang theory trying to locate the perfect spot in the cinema) and as such can be basically nuked out of existence by a few inches difference in speaker location.
It amazes me how much I still come across people who will agonise over speakers and which to buy etc only to get them home and proceed to best guess where to put them in the room and never measure them and adjust until they are at the right location. I spent a small fortune on my studio monitors but I also spent a long time assessing where to put them, how to angle them and measuring out distances on a plan and replicating these distances in the room. Quite simply, getting geeky about your speakers could mean the difference between great speakers sounding great and great speakers sounding like a bad hifi.
As an example, I didn't use to be so picky about speaker location. At one point I moved into a cottage in the countryside and proceeded to pick out the main living room area as my chosen studio location. I promptly set up my gear slap bang in the centre of the room and to my horror couldn't hear any bass whatsoever. I had epic speakers and bass heavy music, why couldn't I hear anything? In short, I was sitting right in the middle of the null point of the room. I experimented by moving my desk (Then on wheels) around and eventually decided on both a different room and an off centre position. The moral of the story, when it comes to speakers, is to read a little and think a lot. You'll thank yourself later.
For those not so keen on reading lots of articles I would say some quick tips are as follows:
1.) There should be a triangle formed between yourself and the speakers. The sides of the triangle should have the same length.
2.) Don't sit with your head in the centre of any dimension of the room. If you sit in the absolute centre of the room, expect to hear no bass, triangle or otherwise.
3.) Imagine a mirror on any surface you see. If you also see a speaker in the imaginary mirror, your speaker will reflect sound off that surface. Invest in acoustic treatment. I don't have thousands of pounds worth of the stuff, you don't need a lot either. Just be careful and plan where you are going to put it.
4.) What are the speakers sitting on? If it vibrates then you just created an issue that might distort the sound.
5.) Avoid putting speakers right next a wall. Especially in corners. Bass will build up and frustration with your weak sounding mixes will follow. As an aside I did get very good results, at one point, from putting a mattress directly behind my monitors. The room I was working in had a terrible shape and I had to make do. Sometimes thinking outside the box can help with less than optimal conditions.
So recently i'm sitting in front of my speakers, working away on a track and I notice that one seems slightly closer than the other. I'm hearing a tiny phase issue, just some washiness so I decide to get out the measuring tape and investigate. I'm not wrong. One is not only closer to the back wall but its also slightly pointing at an angle compared to the other. I can only assume that at some point I must have nudged it just a slight amount, caught it walking by. Why is this important? Well it's important because the distance your speakers are from each other, the wall and you can make a massive difference to what's known as the sweet spot. The sweet spot is where you can hear the mix translated most clearly, every frequency in it's place and nothing over-exaggerated or over-hyped. For most speakers this is a fairly small point (Think Sheldon from the big bang theory trying to locate the perfect spot in the cinema) and as such can be basically nuked out of existence by a few inches difference in speaker location.
It amazes me how much I still come across people who will agonise over speakers and which to buy etc only to get them home and proceed to best guess where to put them in the room and never measure them and adjust until they are at the right location. I spent a small fortune on my studio monitors but I also spent a long time assessing where to put them, how to angle them and measuring out distances on a plan and replicating these distances in the room. Quite simply, getting geeky about your speakers could mean the difference between great speakers sounding great and great speakers sounding like a bad hifi.
As an example, I didn't use to be so picky about speaker location. At one point I moved into a cottage in the countryside and proceeded to pick out the main living room area as my chosen studio location. I promptly set up my gear slap bang in the centre of the room and to my horror couldn't hear any bass whatsoever. I had epic speakers and bass heavy music, why couldn't I hear anything? In short, I was sitting right in the middle of the null point of the room. I experimented by moving my desk (Then on wheels) around and eventually decided on both a different room and an off centre position. The moral of the story, when it comes to speakers, is to read a little and think a lot. You'll thank yourself later.
For those not so keen on reading lots of articles I would say some quick tips are as follows:
1.) There should be a triangle formed between yourself and the speakers. The sides of the triangle should have the same length.
2.) Don't sit with your head in the centre of any dimension of the room. If you sit in the absolute centre of the room, expect to hear no bass, triangle or otherwise.
3.) Imagine a mirror on any surface you see. If you also see a speaker in the imaginary mirror, your speaker will reflect sound off that surface. Invest in acoustic treatment. I don't have thousands of pounds worth of the stuff, you don't need a lot either. Just be careful and plan where you are going to put it.
4.) What are the speakers sitting on? If it vibrates then you just created an issue that might distort the sound.
5.) Avoid putting speakers right next a wall. Especially in corners. Bass will build up and frustration with your weak sounding mixes will follow. As an aside I did get very good results, at one point, from putting a mattress directly behind my monitors. The room I was working in had a terrible shape and I had to make do. Sometimes thinking outside the box can help with less than optimal conditions.
Wednesday, 6 April 2016
The psychology of asking the right question
The human brain is a really weird, dysfunctional, thing. Often we know the answers to questions but we can't pull them out of our brain for love nor money. The key, sometimes, is actually asking a different question.
When i'm working on a track i'll sometimes find it difficult to know what the track needs. I can listen to it and not really understand where to go when I ask "What is the track needing?". Instead what I now try to do is instead ask "Is the track actually done?". If the answer is no then I start finding it easier to point out what makes the track not yet done. Its a shift from thinking about what my next step is to thinking back from my end-point and looking at what the scope of the gap is. For me it works and I can answer the second question much easier than the first. As an aside I also find that thinking in this way actually allows me to work for longer periods of time on a track without getting distracted. This simple loop of assessing whether the track is done often sparks my desire to immediately do the action I come up with there and then, making the move towards the finished track.
When i'm working on a track i'll sometimes find it difficult to know what the track needs. I can listen to it and not really understand where to go when I ask "What is the track needing?". Instead what I now try to do is instead ask "Is the track actually done?". If the answer is no then I start finding it easier to point out what makes the track not yet done. Its a shift from thinking about what my next step is to thinking back from my end-point and looking at what the scope of the gap is. For me it works and I can answer the second question much easier than the first. As an aside I also find that thinking in this way actually allows me to work for longer periods of time on a track without getting distracted. This simple loop of assessing whether the track is done often sparks my desire to immediately do the action I come up with there and then, making the move towards the finished track.
Labels:
asking,
Audio,
brain,
complete,
end,
engineering,
finish,
human,
Music,
Pipo,
production,
Productivity,
psychology,
questions,
thought process
Sunday, 28 February 2016
When to use mix bus compression
Ever wondered when the best time to use mix bus compression is in your project. I thought i'd elaborate on the subject in this short video tutorial.
Labels:
Audio,
buss,
compression,
engineering,
mix,
Mixing,
Music,
Pipo,
production,
Recording
Subscribe to:
Posts (Atom)